For Smartscanner SC9${\rm\sf^{EX1}}$ with Scan Engine version 65 Type 17-S19C-…….. December 2025

Technical data subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages.

Table of Contents

About This Guide

Read carefully before commissioning the device.
This document is auxiliary to the available Quick Start Guide and part of the device.
This guide is directed at all persons who are entrusted with handling the device.
Knowledge of the safety instructions and warnings in this guide and strict compliance with them is essential for safe handling.
• Carefully read these documents and especially the safety instructions herein before using the device.
• Make these documents accessible to all people who are entrusted with handling the device.

Reference Documents

This manual leverages information from, but not limited to:

Zebra barcode symbology reference guides (see Zebra FAQ)
Standardized barcode format references, such as TEC-IT’s.
The product Quick Start Guide included with SC9EX1.

About the Hardware

The SC9${\rm\sf^{EX1}}$ device integrates advanced scanning technology based on the Zebra® SE5500 Scan Engine (SE) for efficient and accurate scanning.

1D/2D Advanced Range Scan Engine with IntelliFocus™ technology.
reading range up to 12.2 m (480.3 in) depending on type, size and quality of the barcode.

All supported symbologies/barcode types are listed in the product datasheet on the BARTEC homepage.

Scan Engine SE5500

Left/right trigger buttons (orange)